|
|
| 1.
Pass code
registration (Make sure to conduct this with the door
unclosed.) | |
|
|
Open the battery cover on the rear side and push the pass
code button once.
Enter a desired pass code of 3 to 20 digits on the number
keypad.
Push the "*" button, and the pass code is registered with a
melody.
Make sure to check that system works on the newly registered pass
code. | |
|
| 2.
Locking
and unlocking from outside | |
|
|
Locking: In auto locking mode, it is locked in 5 seconds by
the automatic locking sensor on the rear side.
In manual locking mode, it is
locked when you push the button on the front side.
Unlocking by the key: Open
the cover above the handle, insert the key and turn it around.
Then the door
lock will unlock.
Unlocking by the pass code: Open the number keypad
cover->Enter "*"->Enter the pass code->*(Within 8
seconds) | |
|
| 3.
Locking
and unlocking from inside | |
|
|
In auto locking mode, the system locks in 5 seconds after
the door is closed. | |
|
| 4.
Auto/manual locking setting | |
|
|
This Keyless entry door
has an automatic locking sensor,
by which it
locks automatically in 5 seconds after the door is closed.
Manual locking
setting: Push the auto/manual button inside the battery cover. The system
generates a single long beep.
Auto locking setting: By pushing the
auto/manual button while the system is in manual locking mode, it goes into auto
locking mode. The system generates several short
beeps. | |
|
|
|
|
|
Outside forced locking: If it is activated, you cannot lock
or unlock from inside.
It is used for an outing for an extended period of
time.
Outside forced locking: If it is activated, you cannot lock or unlock
from inside.
It is used for an outing for an extended period of time.
Inside
forced locking: If it is activated,
you cannot unlock the system from outside
even with a key or the pass code.
It is applicable when all family members are
at home.
Alarm cancellation: From outside, push the "*" button,
enter the
pass code and push the "*" button again. Then, an alarm is
cancelled. | |
|
| 6. Setting
the remote controller | |
|
|
Open the battery cover on the rear side, push the pass code
button inside, press the "2" button and the "*" button, make registration by
pushing the unlocking button on the remote controller, and push the "*" button.
Then the remote controller will be set up.
Cancelling the remote controller:
Open the battery cover on the rear side, push the pass code button inside, and
press the "0" button twice and then the "*" button. Then the remote controller
will be cancelled. | |
|
|
|
|
Open the battery cover on the rear side and push the
melody/mute setting switch. (A single long beep means melody has been set, while
several short beeps represent mute.) | |
| 8.
Default
button function | |
|
|
If you cause a password error or other abnormal states when
using the product, press the button "#" and the product will be restored to
normal state. However, attention should be paid to the fact no alarm is
generated in mute mode. | |
|
| After-sale criteria (Warranty period: 12 months
from installation) |
Shop
by Phone 
