SHP-DS510

This door requires a *35mm to 55mm* thick door, and with a minimum of a *90mm* lock stile which is the measurements from the edge of the door to any detail or glasswork.

  1. When installing this door lock, please make sure that you first find out whether your door is a right-handed or left-handed door. Looking from the outside, if the hinges on your door are on the right, your door is a right-handed door.
  2. Make sure you’ve installed the magnetic sensor in the right port. Sensor port A for right handed doors and sensor port B for left handed doors.

Keep calm, this is an easy fix. Please make sure magnetic sensor has been installed into the correct port (as above), and has been in contact with the magnet (With the batteries in the unit, the door lock should make a “beep” sound when a magnet is close to the magnetic sensor).

 

Videos of the installation as well as the programming of the door lock can be found here.

 

The brochure and manual for the door lock can be found and downloaded here.

 

This door requires a *35mm to 55mm* thick door, and with a minimum of a *90mm* lock stile which is the measurements from the edge of the door to any detail or glasswork.

SHS-3321

This door requires a *35mm to 55mm* thick door, and with a minimum of a *90mm* lock stile which is the measurements from the edge of the door to any detail or glasswork.

  1. When installing this door lock, please make sure that you first find out whether your door is a right-handed or left-handed door. Looking from the outside, if the hinges on your door are on the right, your door is a right-handed door.
  2. Make sure you’ve installed the magnetic sensor in the right port. Sensor port A for right handed doors and sensor port B for left handed doors.

Keep calm, this is an easy fix. Please make sure magnetic sensor has been installed into the door lock. Installing the magnetic sensor will allow the door lock to know which side to throw the deadbolt out. Ensure that you “initialise” the door lock by bringing the magnet into contact with the magnetic sensor (after you’ve installed the magnetic sensor into the door lock) when the batteries are in. You should hear the door lock make a “beep” sound.

Videos of the installation as well as the programming of the door lock can be found here.

The brochure and manual for the door lock can be found and downloaded here.

SHS-H505

This door requires a *40mm to 60mm* thick door, and with a minimum of a *115mm* lock stile which is the measurements from the edge of the door to any detail or glasswork. Extension kits are available from 60 to 80mm thick doors

  1. Ensure that you have the necessary parts to be able to install the door lock onto the door. Double leaf doors require a rebate kit for the door lock to be installed. The door lock can be installed into retrofit doors as well with our retrofit kit. Please ask your builder/carpenter/locksmith to check whether you need any extra parts for your door lock to be installed onto your door. Rebate kits and retrofit kits can be ordered from any Bunnings in Australia. If you have any questions regarding the extra parts, call 1800 665 397.
  2. Ensure that handle shaft pin is used when installing the handle shaft between the lock bodies.

We currently do not have any videos of the installation or programming of the door lock. However, we do have a website with step by step guides on how to program the many features of the lock that can be found here.

The brochure and manual for the door lock can be found and downloaded here.

Make sure your builder knows the minimum installation requirements for the door lock (as above) as well as have prior experience in installing digital door locks. If you’re unsure of who to contact to install your door lock, we have locksmiths that we recommend as well for most cities, please call 1800 665 397 for more information.

SHS-H705

This door requires a *40mm to 60mm* thick door, and with a minimum of a *115mm* lock stile which is the measurements from the edge of the door to any detail or glasswork. Extension kits are available from 60 to 80mm thick doors

  1. Ensure that you have the necessary parts to be able to install the door lock onto the door. Double leaf doors require a rebate kit for the door lock to be installed. The door lock can be installed into retrofit doors as well with our retrofit kit. Please ask your builder/carpenter/locksmith to check whether you need any extra parts for your door lock to be installed onto your door. Rebate kits and retrofit kits can be ordered from any Bunnings in Australia. If you have any questions regarding the extra parts, call 1800 665 397.
  2. Ensure that handle shaft pin is used when installing the handle shaft between the lock bodies.

We currently do not have any videos of the installation or programming of the door lock. However, we do have a website with step by step guides on how to program the many features of the lock that can be found here.

The brochure and manual for the door lock can be found and downloaded here.

Make sure your builder knows the minimum installation requirements for the door lock (as above) as well as have prior experience in installing digital door locks. If you’re unsure of who to contact to install your door lock, we have locksmiths that we recommend as well for most cities, please call 1800 665 397 for more information.

SHS-H717

This door requires a *40mm to 60mm* thick door, and with a minimum of a *115mm* lock stile which is the measurements from the edge of the door to any detail or glasswork. Extension kits are available from 60 to 80mm thick doors

  1. Ensure that you have the necessary parts to be able to install the door lock onto the door. Double leaf doors require a rebate kit for the door lock to be installed. The door lock can be installed into retrofit doors as well with our retrofit kit. Please ask your builder/carpenter/locksmith to check whether you need any extra parts for your door lock to be installed onto your door. Rebate kits and retrofit kits can be ordered from any Bunnings in Australia. If you have any questions regarding the extra parts, call 1800 665 397.
  2. Ensure that handle shaft pin is used when installing the handle shaft between the lock bodies.

We currently do not have any videos of the installation or programming of the door lock. However, we do have a website with step by step guides on how to program the many features of the lock that can be found here.

The brochure and manual for the door lock can be found and downloaded here.

Make sure your builder knows the minimum installation requirements for the door lock (as above) as well as have prior experience in installing digital door locks. If you’re unsure of who to contact to install your door lock, we have locksmiths that we recommend as well for most cities, please call 1800 665 397 for more information.

SHS-H718

This door requires a *40mm to 60mm* thick door, and with a minimum of a *115mm* lock stile which is the measurements from the edge of the door to any detail or glasswork. Extension kits are available from 60 to 80mm thick doors

  1. Ensure that you have the necessary parts to be able to install the door lock onto the door. Double leaf doors require a rebate kit for the door lock to be installed. The door lock can be installed into retrofit doors as well with our retrofit kit. Please ask your builder/carpenter/locksmith to check whether you need any extra parts for your door lock to be installed onto your door. Rebate kits and retrofit kits can be ordered from any Bunnings in Australia. If you have any questions regarding the extra parts, call 1800 665 397.
  2. Ensure that handle shaft pin is used when installing the handle shaft between the lock bodies.

We currently do not have any videos of the installation or programming of the door lock. However, we do have a website with step by step guides on how to program the many features of the lock that can be found here.

The brochure and manual for the door lock can be found and downloaded here.

Make sure your builder knows the minimum installation requirements for the door lock (as above) as well as have prior experience in installing digital door locks. If you’re unsure of who to contact to install your door lock, we have locksmiths that we recommend as well for most cities, please call 1800 665 397 for more information.

TOP