Setup and Registration
1. Unlock and open door and remove battery cover.
2. Press [REG] button.
3. Enter Master PIN (Default: 1234), followed by *
Key Tag Registration
- Enter User number (1~20), followed by *
- Hold keytag against [CARD] sensor until it beeps.
- To register another keytag, repeat the process or press [REG] to end registration.
- The fingerprint reader latch should now be open.
- Place finger on reader until it beeps, repeat this step three times.
- On the third time, the lock will chime three times.
- To register another fingerprint, repeat the process or press [REG] to end registration.
Change Master PIN
Enter NEW Master PIN (4~10 digits), followed by *
Deleting Users & Factory Reset
First, press [REG] for 3 seconds.
The fingerprint reader latch should now be open.
Press finger on the fingerprint reader and lock will chime 3 times indicating that fingerprint has been successfully deleted.
Enter 1470852369 followed by *